Based on the secondary chassis, by adding platforms, diesel engines, clutches, gearboxes, three-cylinder cylinder piston pumps, water tanks, vehicle-specific heat exchangers, burners, gas supply systems, pumping, and modified well-washing wax trucks. Drainage pipes, boiler inlet and outlet pipes, drive systems, hydraulic systems, gas source systems, control systems, etc.
The well and paraffin removal vehicles are mainly used for hot washing and production well crushing; high pressure well washing and pressure testing; paraffin removal pipes and rods cooperate with workover operations.
Well-type wax removal trucks are also widely used to heat other media, dredge and thaw surface pipes and cleaning equipment.
Enterprise implementation standards | Q/DQ GKA 0001-2016-2016 | Working voltage (V) | 24、220、380、660、1140 |
Working environment temperature (°C) | -40~+80 | Working pressure (MPa) | 40 |
Maximum displacement of equipment (L/h) | 40000 | Equipment temperature (°C) | 300 |
Pump service temperature(°C) | ≤80 | Thermal power (kw) | 160 |
IPC operating temperature (°C) | -50~60 | Generator power (kva) | 15 |
Exit temperature (°C) | ≤180 | Inverter power (kw) | 4 |
Triplex plunger pump pressure (MPa) | 1-40 | Touch screen (kw) | 0.01 |
Maximum displacement of triplex plunger pump (L/h) | 40000 | Steam pressure (MPa) | 1.5 |
Fuel tank(L) | 500 | Steam displacement (m3/h) | 4000 |
Water tank (L) | 5000 | Steam temperature (°C) | ≥180 |
Northbound bottom plate | |||
Emission Standards | GB17691-2005 National Phase IV | Chassis model | ND2252F44J |
Announcement model | ST5250TJCG | Curing quality (kg) | 21020 |
Appearance Specifications(mm) | 9720×2500×3960 | Total mass (kg) | 25000 |
Wheelbase (mm) | 4450+1450 | Engine Model | WP10.336E40 |
Tire | 12.00-20 | Engine displacement (ml) | 9726 |
Number of axes | 3 | Engine power (kw) | 247 |
Axle load (kg) | 7000/18000(And biaxial) | Close to the departure angle (°) | 32/12 |
Force method | Transfer case power | Hardener torque | 2000N.m |
Water tank (L) | 300 |