1. The equipment adopts advanced superconducting technology, which has fast heating, fast heat transfer, uniform heat transfer, energy storage, heat release and high thermal efficiency.
2. The temperature of the wax is adjusted according to the actual situation of the well, up to 300 °C. At the same time, it can remove the wax from the sucker rod and the inner wall of the oil pipe, and can clear the wax on the high melting point dirt of the filter tube, the mesh and the jet section, and the organic scale near the formation (such as colloidal asphalt, mechanical impurities, etc.). And the purpose of unblocking.
3. Humanized design, high degree of automation, digital wax control process, simple operation, low labor intensity and high work efficiency.
4. The wax cleaning time is short and the cleaning is fast. According to the depth of the oil well, it can be cleaned in 2-4 hours.
5. The equipment has its own power supply. The total power supply adopts remote control technology. The operation is safe, fast and efficient. The chimney adopts automatic lifting and fireproofing devices. It is equipped with a wind direction meter and lightning protection device, which greatly improves the environmental adaptability of the equipment.
6. Improve the quality of hot washing, prolong the period of washing and checking pumps, reduce the load of the pumping machine and the shaft of the wellbore, reduce the probability of breaking the hairpin and the sucker rod, and improve the efficiency of the machine system.
7. The equipment adopts two-stage automatic combustion system of oil and natural gas dual fuel, and two-stage two-fuel switching.
8. The device has a flow meter. When there is no liquid circulation, the device automatically shuts down, which plays a role in protecting the device.
Enterprise implementation standards
Q/DQ GKA 0001-2016-2016
Working voltage (V)
Working environment temperature (°C)
Working pressure (MPa)
Maximum displacement of equipment (L/h)
Equipment temperature (°C)
Pump service temperature(°C)
Thermal power (kw)
IPC operating temperature (°C)
Generator power (kva)
Exit temperature (°C)
Inverter power (kw)
Triplex plunger pump pressure (MPa)
Touch screen (kw)
Maximum displacement of triplex plunger pump (L/h)
Steam pressure (MPa)
Steam displacement (m3/h)
Water tank (L)
Steam temperature (°C)
Northbound bottom plate
GB17691-2005 National Phase IV
Curing quality (kg)
Total mass (kg)
Engine displacement (ml)
Number of axes
Engine power (kw)
Axle load (kg)
Close to the departure angle (°)
Transfer case power
Water tank (L)