Hot Products


Superconducting Well Cleaning And Wax Removal Vehicle Working Principle
Nov 30, 2018

Methods of wax removal and well washing:

1. Use oil well produced fluid as the medium;

2. Use the equipment's own water tank (oil, pollution, water) as the wax removal medium;

3. Use the steam produced by the equipment to clean Wells.

Working principle of superconducting well washing and wax removal vehicle:

The device is in superconducting function complete hot wash paraffin removal process under the collaboration, drawn from the well fluid as medium (or water tank with the equipment of hot water and steam as medium), after the equipment rapid heating up, under the action of superconductivity and thermodynamic, hot liquid injection in oil well casing annulus, and dozens of meters per second, down the tube quickly into bottom hole, forcing the tubing and fluid temperature increases rapidly. In this way, the heat carrier circulation of the oil well itself is formed, which makes the oil pipe and casing heated from shallow to deep, dissolves the wax deposition in the oil pipe and the sucker rod, and makes the heat exchange occur in the rising process of the output fluid in the well, and the temperature rises rapidly, heating and washing the wax deposition and high-solubility point dirt on the inner wall of the oil pipe. In this way, when the oil pipe is heated inside and outside, the wax deposition and dirt layer dissolve and gradually disappear. At the same time, the soluble plugging material in the liner mesh and jet air section can be washed away to form a vertical heat exchange system, so as to achieve the purpose of hot washing, wax removal and production increase.


  • facebook